Digital Weighing Indicator - SI4000
 |
| Home >Product > Digital Weighing Indicator > SI4000 |
 |
| |
 |
|
 Feature |
| - Industrial Scale (Truck , Tank, Platform , Animal Scale) |
| - External Input : 4pcs input built in |
| - Control Relay output : N.A - Weight display only. |
| - Communication : Serial interface 2pcs(1pcs is standard) |
| - Auto Print Mode (M+ / M-) |
| - HOLD Function (Sample / Peak Hold) |
|
| |
| Specification |
| |
 Calibration |
- Easy to enter with “Calibration Lock-Switch”.
- Full Automatic “Zero” adjustment by program.
(without “Dip-Switch Adjustment)
- “Simulation - Calibration” mode added.
(without “Test Weight” to make calibrate)
|
| |
| Analogue Section |
|
Digital Section |
| Input Sensitivity |
0.3㎶ / Digit |
| Load cell Excitation |
DC 10V (-5V ~ +5V) |
Max. Signal
Input Voltage |
Max.32mV |
Temperature
Coefficient |
[Zero] ±16PPM/℃
[Span] ±3.5PPM/℃ |
| Input Noise |
±0.3㎶ P.P |
| Input Impedance |
Over 10㏁ |
A/D Conversion
Method |
Sigma-Delta |
A/D Resolution
(Internal) |
520,000 Count(19bit) |
| A/D Sampling Rate |
Max. 500times / Sec |
| Non-Linearity |
0.005% FS |
Display
Resolution(External) |
1/20,000 |
|
|
| Display |
Parts |
Specification |
| Display |
Main Display |
7Segments, 7digits
VFD green Color
Size :12.7(H) ×7.0(W)mm |
| Min. Division |
×1,×2,×5,×10,×20,×50 |
| Max. Display |
+999.950 |
| Under Zero |
"-" (Minus display) |
Status
lamp |
Steady, Zero,
Tare, Hold, Gross, Print, Comm. |
" ▼" Condition display Lamp |
| kg, g, t |
Red LED Display(3Ø) |
| Key pad |
Number, Function, CAL. Lock Key
Number Key, Function, CAL.
Lock keys (16pcs) |
|
| |
| General Section |
|
Option |
| Power Supply |
AC110/220V±10%), 50/60Hz,
about 30VA |
Operating
Humidity Range |
Under 85% Rh
(non-condensing) |
| External Dimension |
200mm(W)ｘ105mm(H)ｘ
165mm(L) |
| Net Weight(kg) |
About 2.3kg |
| Gross Weight(kg) |
About 3.0kg |
|
|
| Option No.1 |
Serial Port(RS232 / 422 / 485) |
| Option No.2 |
Analogue Output(0~10V) |
| Option No.3 |
Analogue Output(4~2mA) |
| Option No.4 |
BCD input |
| Option No.5 |
BCD Output |
| Option No.6 |
Parallel Printer Interface |
|
| |
|
* 1pcs of Serial interface is installed as a standard |
| |
| Option List |
|
System Application |
| Model |
Remarks |
| Standard |
RS-232C |
| Option 01 |
RS232/422/485(Optional Serial Port) |
| Option 02 |
Analog Out (0~10V) |
| Option 03 |
Analog Out (4~20mA) |
| Option 04 |
Printer Interface (Centronics Pallele) |
| Option 05 |
BCD In (Part No. Change) |
|
|
 |
|
| |
|
| |
|
|
|
