Digital Weighing Indicator - SI4200
|
Home >Product > Digital Weighing Indicator > SI4200 |
|
|
|
Feature |
- Quantity Control / Counting Indicator (Weight ? Quantity) |
- External Input : 4pcs input built in |
- Control Relay output : SP1, SP2, Under, Over, Finish, Empty |
- Communication : Serial interface 2pcs(1pcs is standard) |
- Precise Quantity Conversion through “Unit Calibration” mode |
- All Control Relay will be output basis on Quantity setting |
- Visible Output Relay signal on Front Panel (2Ø RED LED) |
|
|
Specification |
|
Calibration |
- Easy to enter with “Calibration Lock-Switch.
- Full Automatic “Zero” adjustment by program.
(without “Dip-Switch Adjustment)
- “Simulation - Calibration” mode added.
(without “Test Weight” to make calibrate) |
|
Analogue Section |
|
Digital Section |
Input Sensitivity |
Min. 0.1㎶ / Digit |
Load cell Excitation |
DC 10V (-5V ~ +5V) |
Non-Linearity |
0.005% of Full Scale |
Temperature Coefficient |
[Zero] ±5PPM/℃ [Span] ±5PPM/℃ |
Input Noise |
±0.3㎶ P.P |
A/D Conversion Method |
Sigma-Delta |
Sampling Speed |
Max. 500times/sec |
Resolution |
Internal : 1/520,000(19bit) Display : 1/20,000 |
|
|
Display |
Section |
Specification |
Main Display |
Weight Display |
7 Segment, 7 Digit Green VFD
12.7(H)×7.0(W)mm |
Digit(Division) |
×1,×2,×5,×10,×20,×50 |
Max. Display |
+999.950 |
Under Zero |
“-“ symbol display |
Status Display |
“▼” display |
Steady, Zero, Tare, Run, Limit, Print, Comm. |
2Ø RED LED |
SP1, SP2, Kg, g, t |
Key pad |
Number keys : Total 15keys
Calibration Lock key : 1pcs |
|
|
General Section |
|
Option |
Power Supply |
AC110/220V, 50/60Hz |
Operating Condition |
-10℃~+40℃ Less than 85% Rh |
Dimension |
200(L) ×105(W) ×165mm(D) |
Cutting Size |
188(L) ×94mm(H) |
Weight (kg) |
Net 3.0kg Gross 3.5kg |
|
|
Option No.1 |
Serial Port(RS232 / 422 / 485) |
Option No.2 |
Analogue Output(0~10V) |
Option No.3 |
Analogue Output(4~2mA) |
Option No.4 |
BCD input |
Option No.5 |
BCD Output |
Option No.6 |
Parallel Printer Interface |
|
|
|
* 1pcs of Serial interface is installed as a standard |
|
Option List |
|
System Application |
Model |
Remarks |
Standard |
RS-232C |
Option 01 |
RS232/422/485(Optional Serial Port) |
Option 02 |
Analog Out (0~10V) |
Option 03 |
Analog Out (4~20mA) |
Option 04 |
Printer Interface (Centronics Pallele) |
Option 05 |
BCD In (Part No. Change) |
|
|
|
|